How to Fill and Purge the NRCR
If you’re installing a new NRCR and want to make sure things get off to a great start or if...
- Home
- Tankless Products
- NRCR
NRCR
Knowledgebase for the models NRCR92 and NRCR111
-
-
Programming Different NRCR Recirculation Modes
Below are a collection of videos that will show you how to set up the different recirculation modes of the... -
Adjusting NRCR Auto Learn Sensitivity
Customize Your NRCR Settings The NRCR auto learning program will flag any hot water use that is 3 seconds or... -
Adjusting NRCR Pre-Run Time
Customize your NRCR settings The NRCR has a pre-run feature that will start running the recirculation pump ahead of the... -
Adjusting NRCR Auto Learn Memory Duration
When using the default auto learning mode with the NRCR the unit will automatically adjust the recirculation schedule based on... -
Crossover Branch Pipe Kit for the NRCR
The branch pipe is needed when using crossover mode. When installing the NRCR with a crossover valve, the cold water... -
NRCR Changing Modes (Noritz Connect App)
If you wish to change the recirculation mode of your NRCR it will need to be done at the physical... -
Replacing a Circuit Board for Pre-Mix Units
This includes the NRCR, EZ Series and NCC199CDV This guide applies to the NRCR, EZ Series and the NCC199CDV. The... -
Clean or Change the Fan for a Pre-Mix Unit
Video for maintenance on a Pre-Mix Noritz Tankless -
No Roof Kit Installation (NRK-1)
Maximize your ease of installation with the new Noritz No Roof Kit. Our newest accessory is designed to make your...
Need Support?
Can't find the answer you're looking for? Don't worry we're here to help!
CONTACT SUPPORT